gws
Member
Posts: 969
Location: NW New Mexico
|
Post by gws on Jan 9, 2023 1:07:09 GMT -5
Been working on feeding bullets and cases to the Lee. .223 works fine. Bullets are dropped after expanding necks with RCBS's "M" style expander. They are not seated....that test comes next.
Last bullet had a nick in the base, which kept it from falling in the "M" pocket. Always something......
|
|
|
|
Post by hacker54 on Jan 9, 2023 17:22:22 GMT -5
Well Greg since you said a couple tweeks and you should be running full bore and smooth sailing.
|
|
gws
Member
Posts: 969
Location: NW New Mexico
|
Post by gws on Jan 12, 2023 15:55:58 GMT -5
Here's a little video that show how it's put together.....pretty simple & inexpensive.
Parts:
1. Modified TylerR Hanger made to fit the 6000.
2. .223 TylerR Insert with clear tubing pressed in...including small centering spacer on top.
3. Anchor for outer tubing going to proximity switch and collator
4. twist adapter and bigger tubing to connect collator to outer tube vertical.
On the left you can see the bullet collator spring tube going to the 3d printed bullet feed die.
|
|
|
|
Post by hacker54 on Jan 12, 2023 17:03:16 GMT -5
Hope to see the video on start to finish of doing a few rounds.
|
|
My daughter came from Missouri, my son and grand son, my wife and I had a nice dinner of grilled "porter house" pork chops, corn on the cobb, my son, G'son and I share 10/5. G'son is 4 minutes early though @ 10/4.
Pooh I hope you find to right house . 
