Post by hacker54 on Jun 18, 2024 19:21:02 GMT -5
Since Greg mentioned about this press I've been going over the details of this press and I finally got one. So a after a few hundred rounds I will say this. I LIKE IT!!!!! I got the basic five hole turret that had all of Lee's smart bushings in place. I first loaded some 6.8 SPC about a hundred give or take. I fixed up my own bullet feed die to use. I used from my old Classic Loader in 7mm08. These are the ones that come in the little box that you use a plastic mallet on. The adjuster was wide enough that it rest on top of a bushing and not harm the threads of the bushing. Just drop the bullet in and give a tap then on to seat. I have the Lee Inline Bullet Feed Die .35 Cal so I did some 38spl. I had to move the little ball bearings so I could do the 125gr. bullets to feed properly. I plan on getting another inline in .35 and us it for longer bullets. Next is some 30/30 Win. I have one of those little loaders in that also so I'll be using it for bullet feed die.
My daughter came from Missouri, my son and grand son, my wife and I had a nice dinner of grilled "porter house" pork chops, corn on the cobb, my son, G'son and I share 10/5. G'son is 4 minutes early though @ 10/4.
Pooh I hope you find to right house . 
