Post by erjdriver on Oct 2, 2014 9:51:03 GMT -5
I'm sure gws will be chiming in on this one... 
Some time ago when I was setting up my Pro2000 Auto-Indexing Press, I was having issues with the APS strip primer. Turns out one of the HPT Detents was broken and a variety of other parts needed replacing. At any rate, ATK/RCBS sent, along with a variety of other stuff, a PDF document for "Pro2000 Shellplate Index Cam Adjustment and Troubleshooting". I honestly can't make heads or tails of the descriptions to adjust the indexing function, as there are no pictures/photos to refer to in the document.
Can anyone (gws) provide any guidance on adjusting the auto-index of the press? It seems to be over-indexing since I installed the softer Detent Ball Spring. Also does anyone (gws) have a maintenance manual just in general for the Pro2000 press? I e-mailed ATK/RCBS to see if they have one.
Thanks anyone and everyone!!
jvb
ETA:
I got a response from ATK and all they did was send me a PDF of the basic user manual. While appreciated, I don't think they grasp what I'm looking for.....more along the lines of a "shop manual" a repair tech would use; like at an auto repair shop...a "Chilton's Manual".
ETA #2:
Response from ATK/RCBS...
"Joel, you will need to slow down your handle speed since the indexing speed it is controlled by the reloader."
Kind of interesting since the attachment below has some instructions on how to adjust over/under-indexing.
PRO 2OOO Troubleshooting.pdf (85.84 KB)
ETA #3:
OK...I sat down with a clear head and read through the Troubleshooting instructions and figured out that the references to the page numbers and part numbers are contained in the Pro2000 User Manual. Now that I know what these references are for, I should be able to figure this out, but would still appreciate any insight on the matter.
Some time ago when I was setting up my Pro2000 Auto-Indexing Press, I was having issues with the APS strip primer. Turns out one of the HPT Detents was broken and a variety of other parts needed replacing. At any rate, ATK/RCBS sent, along with a variety of other stuff, a PDF document for "Pro2000 Shellplate Index Cam Adjustment and Troubleshooting". I honestly can't make heads or tails of the descriptions to adjust the indexing function, as there are no pictures/photos to refer to in the document.
Can anyone (gws) provide any guidance on adjusting the auto-index of the press? It seems to be over-indexing since I installed the softer Detent Ball Spring. Also does anyone (gws) have a maintenance manual just in general for the Pro2000 press? I e-mailed ATK/RCBS to see if they have one.
Thanks anyone and everyone!!
jvb
ETA:
I got a response from ATK and all they did was send me a PDF of the basic user manual. While appreciated, I don't think they grasp what I'm looking for.....more along the lines of a "shop manual" a repair tech would use; like at an auto repair shop...a "Chilton's Manual".
ETA #2:
Response from ATK/RCBS...
"Joel, you will need to slow down your handle speed since the indexing speed it is controlled by the reloader."
Kind of interesting since the attachment below has some instructions on how to adjust over/under-indexing.
PRO 2OOO Troubleshooting.pdf (85.84 KB)
ETA #3:
OK...I sat down with a clear head and read through the Troubleshooting instructions and figured out that the references to the page numbers and part numbers are contained in the Pro2000 User Manual. Now that I know what these references are for, I should be able to figure this out, but would still appreciate any insight on the matter.
(slightly impatient nature). 
My daughter came from Missouri, my son and grand son, my wife and I had a nice dinner of grilled "porter house" pork chops, corn on the cobb, my son, G'son and I share 10/5. G'son is 4 minutes early though @ 10/4.
Pooh I hope you find to right house . 
